How to use the weighted grade calculator
- Copy the categories from your syllabus, such as homework, quizzes, labs, a midterm and a final exam, each with its weight. Add or remove rows to match.
- Enter your score in each category. Use Percent if your gradebook shows a percentage for the category, or Points to type points earned and points possible, such as 132 out of 150.
- Switch off categories with no grades yet. They are left out of the current grade, the way Canvas shows a student’s Current Grade by default, according to Ohio State’s teaching center.
The large figure is your weighted grade, with a letter on the common 90/80/70/60 scale. The example already filled in has homework at 95%, quizzes at 132 of 150 points (88%) and a midterm at 81%, with the final exam still to come. Over the 65% of the course graded so far, that is 87.46%, a B. A second card shows the stricter figure that counts the ungraded final as zero, 56.85%, and the list under it shows how many course points each category has earned.
How a weighted grade is calculated
A weighted grade multiplies your percentage in each category by that category’s weight and adds the results:
When the weights add up to 100%, the division changes nothing and you can read each product as course points earned. Canvas, the learning management system many colleges use, explains its own weighting with three assignment groups weighted 20%, 50% and 30%:
| Group | Weight | Your score | Score × weight |
|---|---|---|---|
| A | 20% | 75% | 0.75 × 0.20 = 0.150 |
| B | 50% | 98% | 0.98 × 0.50 = 0.490 |
| C | 30% | 87% | 0.87 × 0.30 = 0.261 |
| Total | 100% | 0.901 = 90.1% |
Notice that a simple average of the three scores would be (75 + 98 + 87) ÷ 3 ≈ 86.7%. The weighted grade is higher because the strongest score sits in the category worth half the course. Load this example from the “20% / 50% / 30% groups” chip to check it.
Categories with no grades yet
Partway through a term, some categories, usually the final exam, have nothing in them. Canvas leaves those groups out and divides by the combined weight of the groups that do have grades. If group C in the example above had no graded work yet:
That 91.43% is a current grade: how you are doing on the work so far. Ohio State’s teaching center describes the other common view, a total that counts missing work as zero. On that basis the same student has 64% of the course points, because the 30% in group C has not been earned yet. Both numbers are correct; they answer different questions. The calculator shows the current grade as the main result and the zero-filled total in the card beside it.
The gap between the two is the part of the course still open. The University of Calgary’s grade tip sheet works the same idea in points: a student with 55 points banked before a 30% final needs 25 of the 30 final points, 83.33%, to finish with 80.
Entering scores as points
Inside a category, the percentage is usually total points earned over total points possible, not the average of each assignment’s percentage. Canvas’s example: three assignments worth 25 points in all, with 15 points earned, give the group 60% (15 ÷ 25), and that 60% is what gets multiplied by the group’s weight.
The two methods differ when assignments have different point values. A 10-point quiz scored 10 and a 50-point quiz scored 30 total 40 of 60 points, or 66.67%. Averaging the two percentages, 100% and 60%, would give 80% instead. If your instructor averages percentages within a category, work out that average yourself and enter it in Percent mode.
When the weights do not add up to 100%
If you enter only some categories, or your syllabus lists weights as points (for example homework 150 and exams 450), the totals will not be 100. The calculator divides by whatever total you enter, so only the ratios between the weights matter: 150 and 450 act exactly like 25% and 75%. A note appears when the total is not 100% in case a weight was mistyped.
Extra credit is handled differently from course to course. Canvas’s own help video suggests weighting an extra-credit group at 0% until the course nears completion, then giving it the percentage you want to award, which can push the total above 100%. This calculator divides by the total weight instead, so an extra category is averaged in rather than added on top. To model bonus points, enter a category score above 100%.
Weighted grades versus total points
Some courses skip weights and simply add up every point. The two systems can give noticeably different grades. Say homework is 190 of 200 points (95%) and exams are 210 of 300 points (70%):
| System | Calculation | Grade |
|---|---|---|
| Total points | (190 + 210) ÷ (200 + 300) | 80% |
| Weighted: homework 20%, exams 80% | 0.95 × 0.20 + 0.70 × 0.80 | 75% |
| Weighted: homework 50%, exams 50% | 0.95 × 0.50 + 0.70 × 0.50 | 82.5% |
Under total points, homework carries 40% of the grade because it holds 200 of the 500 points. Weights let an instructor decide that share directly. Check which system your syllabus uses before you plan around a number.
Common mistakes with weighted grades
- Averaging the category scores. A plain average treats a 10% quiz category like a 40% exam category. Multiply by the weights instead.
- Mixing up weights and points. A final exam worth 100 points is not necessarily worth 100% or even a large share of the grade; the syllabus weight decides that.
- Counting an empty category as zero too early. That shows the grade you would get if you did no more work, which is useful as a floor but is not your current standing.
- Rounding too soon. Keep the decimals until the end. Many gradebooks round only the final course percentage, and some do not round at all.
What to do with the result
To find the score you need on a final exam to reach a target grade, enter your current grade and the final’s weight in the final grade calculator. To turn a single test’s points into a percentage first, use the test grade calculator. A weighted GPA is a different calculation, which adds bonus points for honors and AP classes on a 4.0 scale; the weighted GPA calculator covers that.
Sources & assumptions
How this calculator gets its numbers. Full method: our methodology.
- Weighted grade = Σ(category percent × weight) ÷ Σ(weights of the categories that have grades).
- A category in points converts to a percent first: points earned ÷ points possible × 100.
- Ungraded categories are left out of the current grade, as Canvas does; the second figure counts them as 0.
- Weights that do not add up to 100% are used as ratios. Letters use the 90/80/70/60 scale; no rounding, curve or dropped scores are applied.
Sources
- Instructure Community (Canvas), How do I weight the final course grade based on assignment groups?. Course grade = Σ(group percentage × group weight); groups with nothing graded are left out and the rest are divided by their combined weight (the 90.1% and 91.43% examples).
- The Ohio State University, Teaching and Learning Resource Center, Calculate Final Grades. The difference between Canvas’s “current grade” (graded work only) and a total that counts missing work as zero.
- University of Calgary, Student Success Centre, How to Calculate your Grades Tip Sheet. Worked example: 55 points banked before a 30% final; a goal of 80 needs 25 of 30 points, or 83.33% on the final.
Last reviewed . Your syllabus and your instructor’s gradebook settings decide the official grade.
Frequently asked questions
How do I calculate my weighted grade?
Multiply your percentage in each category by its weight, add the products and divide by the total weight. With 20%, 50% and 30% weights and scores of 75%, 98% and 87%, the grade is 0.150 + 0.490 + 0.261 = 90.1%.
How do I calculate my grade if the final exam is not graded yet?
Leave the final out and divide by the weights of the graded categories only. Scores of 75% (weight 20%) and 98% (weight 50%) give 0.64 ÷ 0.70 ≈ 91.43%.
What is the difference between a weighted and an unweighted grade?
An unweighted grade adds up all points, so categories with more points count more. A weighted grade fixes each category’s share, such as exams at 60%, whatever their point totals.
Do the weights have to add up to 100%?
No. The calculator divides by the total you enter, so weights of 150 and 450 work the same as 25% and 75%. Most syllabi do list weights that total 100%.
How do I convert points to a percentage in a category?
Divide total points earned by total points possible and multiply by 100. 132 out of 150 points is 88%.
Why is my weighted grade different from the average of my scores?
A plain average gives every category the same weight. If your strongest scores are in heavily weighted categories, the weighted grade is higher than the average, and lower if your weakest scores are.